Tapping with a Magnetic Drilling Machine
The Turbo™ M-Tap can be used directly in any magdrill with reverse for tapping through holes.
Tapping Accessories
Versatile, quick and effective solutions for tapping through holes with any reverse speed magnetic drill or impact wrench using JEI's impact socket adaptor
Provides a far more economical investment than using costly tapping heads and collets.
Why the Tapping Accessories Cutters?
Can be mounted to an impact wrench, using JEI’s impact socket adaptor for an even faster site solution (max 12mm depth). Available with 1/2" or 3/4" drive.
ADD TO ORDERTurbo™ M-Tap
A VERSATILE, QUICK AND EFFECTIVE SOLUTION TO PROVIDE A BOLT READY THREAD TO PRE-EXISTING HOLES.
- Feature a 19mm shank to fit directly into the cutter arbor
- Ideal for use with JEI magdrill models HM50T and HM100T
- For through holes only
- Versatile for use in any magdrill with reverse and variable speed control
- Can be used with an impact wrench using one of our impact socket adaptors, to tap through 12 mm depth
- Available in sizes ranging from M8 - M30
- Purchase as a handy 5 piece set including sizes M8, M10, M12, M16 & M20 plus both impact socket adaptors
Turbo™ M-TAP for use with a magnetic drill with reverse or an impact wrench using JEI'S Impact socket adaptors
Tapping with an Impact Wrench
The Turbo™ M-Tap can be used with an impact wrench using our impact socket adaptor (available on 1/2" and 3/4" drive) up to a maximum depth of 12 mm.
MAG TAP 5 PIECE SET WITH IMPACT SOCKET ADAPTORS
The Turbo™ M-Tap's are available as a handy five piece set including tap sizes M8, M10, M12, M16 & M20 including both a 1/2" & 3/4" impact socket adaptor to enable the user to tap through holes with either a magdrill with reverse or an impact wrench
Drill and Tap in One
A one piece drilling and tapping solution saving the customer both on cost and time. Requires a pilot hole.
- Feature a 19 mm shank to fit straight into cutter arbor
- Ideal for JEI models HM50T and HM100T
- For through holes only
- Available in sizes ranging from M8 - M30
TAP HOLDERS (19MM SHANK)
Our tap holders are a cost effective solution for using DIN376 type taps directly in any magnetic drilling machine with reverse, to tap pre-existing holes.
- Feature a 19 mm shank to fit straight into the cutter arbor
- Ideal for use with JEI models HM50T and HM100T
- Designed to suit standard DIN 376 type taps
- Inexpensive option to suit existing taps
- For through holes only
- Available in sizes ranging from M8 - M30
Impact Socket Adaptor
This JEI adaptor will allow you to tap pre-drilled holes using the Turbo™ M-Tap in an impact wrench.
- For use with an impact wrench
- Compatible with JEI's Turbo™ M-Taps and Turbo™ bridge reamers both fitted on a 19 mm weld on shank
- Available with a 1/2" (JEIHEXS) or 3/4" (JEIHEXL) drive
Do you need a solution for your pre-drilling application? Check out our range of annular broaching cutters and Turbo™ twist drills available in tapping sizes.
HSS Annular CuttersGet the very best tapping results with further products from JEI's extensive range of drilling and cutting solutions
MagBeast® HM50T
A heavy duty 2 morse taper drilling machine, Featuring variable speed and reverse function.
View details
MagBeast® HM100T
The complete 3MT magnetic drilling and tapping model also capable of cutting, reaming, counterboring and threading holes.
View details
Turbo™ Steel M2-AL (HSS)
Delivers increased cutting power, reduced resistance and enhanced tool life - more holes per cutter.
View details
Tapping Attachments
View details
Cutting Oils & Lubricants
Formulated to enhance cutter performance and extend tool life.
View details
Turbo™ Bridge Reamers
JEI present an ideal solution for the steel erector to enlargen and align pre-drilled holes in structural steel.
View details
Turbo™ Twist Drills
An ideal solution to drill holes with a magnetic drilling machine, without the need of a chuck.
View details
Turbo™ M-Tap
A VERSATILE, QUICK AND EFFECTIVE SOLUTION TO PROVIDE A BOLT READY THREAD TO PRE-EXISTING HOLES.
- Feature a 19mm shank to fit directly into the cutter arbor
- Ideal for use with JEI magdrill models HM50T and HM100T
- For through holes only
- Versatile for use in any magdrill with reverse and variable speed control
- Can be used with an impact wrench using one of our impact socket adaptors, to tap through 12 mm depth
- Available in sizes ranging from M8 - M30
- Purchase as a handy 5 piece set including sizes M8, M10, M12, M16 & M20 plus both impact socket adaptors
Turbo™ M-TAP for use with a magnetic drill with reverse or an impact wrench using JEI'S Impact socket adaptors
Tapping with a Magnetic Drilling Machine
The Turbo™ M-Tap can be used directly in any magdrill with reverse for tapping through holes.
Tapping with an Impact Wrench
The Turbo™ M-Tap can be used with an impact wrench using our impact socket adaptor (available on 1/2" and 3/4" drive) up to a maximum depth of 12 mm.
MAG TAP 5 PIECE SET WITH IMPACT SOCKET ADAPTORS
The Turbo™ M-Tap's are available as a handy five piece set including tap sizes M8, M10, M12, M16 & M20 including both a 1/2" & 3/4" impact socket adaptor to enable the user to tap through holes with either a magdrill with reverse or an impact wrench
Drill and Tap in One
A one piece drilling and tapping solution saving the customer both on cost and time. Requires a pilot hole.
- Feature a 19 mm shank to fit straight into cutter arbor
- Ideal for JEI models HM50T and HM100T
- For through holes only
- Available in sizes ranging from M8 - M30
TAP HOLDERS (19MM SHANK)
Our tap holders are a cost effective solution for using DIN376 type taps directly in any magnetic drilling machine with reverse, to tap pre-existing holes.
- Feature a 19 mm shank to fit straight into the cutter arbor
- Ideal for use with JEI models HM50T and HM100T
- Designed to suit standard DIN 376 type taps
- Inexpensive option to suit existing taps
- For through holes only
- Available in sizes ranging from M8 - M30
Impact Socket Adaptor
This JEI adaptor will allow you to tap pre-drilled holes using the Turbo™ M-Tap in an impact wrench.
- For use with an impact wrench
- Compatible with JEI's Turbo™ M-Taps and Turbo™ bridge reamers both fitted on a 19 mm weld on shank
- Available with a 1/2" (JEIHEXS) or 3/4" (JEIHEXL) drive
Do you need a solution for your pre-drilling application? Check out our range of annular broaching cutters and Turbo™ twist drills available in tapping sizes.
HSS Annular CuttersGet the very best tapping results with further products from JEI's extensive range of drilling and cutting solutions
MagBeast® HM50T
A heavy duty 2 morse taper drilling machine, Featuring variable speed and reverse function.
View details
MagBeast® HM100T
The complete 3MT magnetic drilling and tapping model also capable of cutting, reaming, counterboring and threading holes.
View details
Turbo™ Steel M2-AL (HSS)
Delivers increased cutting power, reduced resistance and enhanced tool life - more holes per cutter.
View details
Tapping Attachments
View details
Cutting Oils & Lubricants
Formulated to enhance cutter performance and extend tool life.
View details
Turbo™ Bridge Reamers
JEI present an ideal solution for the steel erector to enlargen and align pre-drilled holes in structural steel.
View details
Turbo™ Twist Drills
An ideal solution to drill holes with a magnetic drilling machine, without the need of a chuck.
View details
Can't find the size you require? Get in touch.
We can manufacture a range of cutters and machines to suit your requirement. No matter your requirement, contact us today and speak to our specialist team.
Contact Us